Normally, when using a dimmer in a 3-way or 4-way circuit, only one dimmer can be used in the circuit to control the load. Select Leviton product lines, including Decora Smart, Decora Digital, Renu, and Renoir II, support the use of Companion Dimmer Remote devices, which can be used to dim from multiple locations in a 3-way or 4-way circuit. Please refer to your device’s instruction sheet for 3-way compatibility information.
Articles in this section
- Can a dimmer control a ceiling fan?
- Is there a special requirement of how the wires need to be run for 0-10V dimmers from the dimmer wallbox to the fixture box since there is line voltage and low voltage?
- Are the 0-10V dimmers capable of dimming down to 1%; or what is the minimum dimming level (percentage)?
- Are there low voltage wiring distance limitations for 0-10V dimmers?
- Do I need power going to the switch portion (line voltage on Black lead) to control dimming on the IP710 and DS710?
- Is a power pack required for switching 0-10V dimmers?
- What will happen if I mix bulb types with an LED Dimmer?
- How do I turn the Decora Rocker Slide dimmer locator light ON or OFF?
- Can I use more than one dimmer to control the same light?